Welcome to our Hands-On Sessions at this year’s IDS!
We’re excited to offer you the opportunity to engage directly with our latest products and techniques through practical, interactive sessions. Our expert team will guide you through various demonstrations, ensuring you get the most out of each experience.
To participate, simply visit our booth and register for the sessions that interest you.
We look forward to welcoming you and providing valuable insights to enhance your practice!
Hands-on desk 1
Smilesculpt: achieving outstanding smiles with free hand, single shade restorations
Adriano Texeira, DDS, MSc
9:30 - 10-30
Unveiling the secrets to a correct emergence profile on a lateral diastema
Radoslav Asparuhov, DDS, MSc
11:00 - 12:00
Simplified layering: Aesthetic solutions for anterior restorations
Adriano Teixeira, DDS, MSc
12:30 - 13:30
Bulk fill vs biomimetic restorations: getting the best of each
Georg Benjamin, DDS, MSc
14:00 - 15:00
Extending the limits of indications for a direct posterior restoration
Stephane Browet, DDS, MSc
15:30 - 16:30
Reinforced biomimetic solutions for posterior restoration
Javier Tapia Guadix, DDS, MSc
17:00 - 17:45
Hands-on desk 2
Creating direct veneers with injection moulding technique
Ieva Jelisejeva, DDS, MSc
9:30 - 10-30
Posterior wear management with injection moulding technique
Ieva Jelisejeva, DDS, MSc
11:00 - 12:00
Deep margin elevation and stress-free onlay preparation
Radoslav Asparuhov, DDS, MSc
12:30 - 13:30
Combining the modern with the practical crown workflows for high efficiency
Adriano Teixeira, DDS, MSc
14:00 - 15:00
Bringing indirect restorations to life with painting and luting
Adriano Teixeira, DDS, MSc
15:30 - 16:30
Master Lithium Disilicate: surface characterization by polishing and luting protocols
Ieva Jelisejeva, DDS, MSc
17:00 - 17:45
Hands-on desk 3
Mastering anterior composite restorations
Dimitris Spagopoulos, DDS, MSc
11:00 - 12:00
The secrets to onlay luting
Dr. Anthony Mak
12:30 - 13:30
Where to start with injection moulding technique
Dr. Marua Hawi
14:00 - 15:00
Advanced injection moulding technique
Dr. Edoardo Fossati
17:00 - 17:45
Hands-on desk 1
Smilesculpt: achieving outstanding smiles with free hand, single shade restorations
Adriano Texeira, DDS, MSc
9:30 - 10:30
Unveiling the secrets to a correct emergence profile on a lateral diastema
Radoslav Asparuhov, DDS, MSc
11:00 - 12:00
Simplified layering: Aesthetic solutions for anterior restorations
Adriano Texeira, DDS, MSc
12:30 - 13:30
Bulk fill vs biomimetic restorations: getting the best of each
Ieva Jelisejeva, DDS, MSc
14:00 - 15:00
Extending the limits of indications for a direct posterior restoration
Radoslav Asparuhov, DDS, MSc
15:30 - 16:30
HANDS-ON desk 2
Creating direct veneers with injection moulding technique
Ieva Jelisejeva, DDS, MSc
9:30 - 10-30
Posterior wear management with injection moulding technique
Ieva Jelisejeva, DDS, MSc
11:00 - 12:00
Deep margin elevation and stress-free onlay preparation
Radoslav Asparuhov, DDS, MSc
12:30 - 13:30
Combining the modern with the practical crown workflows for high efficiency
Adriano Teixeira, DDS, MSc
14:00 - 15:00
Bringing indirect restorations to life with painting and luting
Adriano Teixeira, DDS, MSc
15:30 - 16:30
Hands-on desk 3
Treatment approaches for MIH-affected molars
Prof. Katrin Bekes
9:30 - 10:30
Mastering Universal Luting for lithium discilicate overlays
Priv-Doz. Dr. José Zorzin
11:00 - 12:00
Modern approaches to treatment of root caries
Prof. Falk Schwendicke
12:30 - 13:30
Two approaches for veneer placement
Dr. Daniel Nowakowski
14:00 - 15:00
The Art of simplicity: Polychromatic layering for Class IV restorations
Dr. Taha Yasin Sarikaya
15:30 - 16:30
Hands-on desk 1
Smilesculpt: achieving outstanding smiles with free hand, single shade restorations
Javier Tapia Guadix, DDS, MSc
9:30 - 10-30
Unveiling the secrets to a correct emergence profile on a lateral diastema
Stephane Browet, DDS, MSc
11:00 - 12:00
Simplified layering: Aesthetic solutions for anterior restorations
Georg Benjamin, DDS, MSc
12:30 - 13:30
Bulk fill vs biomimetic restorations: getting the best of each
Georg Benjamin, DDS, MSc
14:00 - 15:00
Extending the limits of indications for a direct posterior restoration
Stephane Browet, DDS, MSc
15:30 - 16:30
Reinforced biomimetic solutions for posterior restoration
Javier Tapia Guadix, DDS, MSc
17:00 - 17:45
Hands-on desk 2
Creating direct veneers with injection moulding technique
Adriano Teixeira, DDS, MSc
9:30 - 10-30
Posterior wear management with injection moulding technique
Radoslav Asparuhov, DDS, MSc
11:00 - 12:00
Deep margin elevation and stress-free onlay preparation
Stephane Browet, DDS, MSc
12:30 - 13:30
Combining the modern with the practical crown workflows for high efficiency
Radoslav Asparuhov, DDS, MSc
14:00 - 15:00
Bringing indirect restorations to life with painting and luting
Javier Tapia Guadix, DDS, MSc
15:30 - 16:30
Master Lithium Disilicate: surface characterization by polishing and luting protocols
Adriano Teixeira, DDS, MSc
17:00 - 17:45
Hands-on desk 3
When to lute, when to cement?
Dr. Roberto Sorrentino
9:30 - 10:30
Treatment approaches for MIH-affected molars
Prof. Katrin Bekes
11:00 - 12:00
Biocompatible solutions step-by-step for ageing patients
Prof. Matteo Basso
12:30 - 13:30
Just flow: using injectables for Class I restorations
Dr. Mindaugas Kudelis
14:00 - 15:00
Tips and tricks in luting indirect veneers
Prof. Joseph Sabbagh
15:30 - 16:30
Modern approaches to treatment of root caries
Prof. Falk Schwendicke
17:00 - 17:45
Hands-on desk 1
Smilesculpt: achieving outstanding smiles with free hand, single shade restorations
Javier Tapia Guadix, DDS, MSc
9:30 - 10:30
Unveiling the secrets to a correct emergence profile on a lateral diastema
Stephane Browet, DDS, MSc
11:00 - 12:00
Simplified layering: Aesthetic solutions for anterior restorations
Georg Benjamin, DDS, MSc
12:30 - 13:30
Bulk fill vs biomimetic restorations: getting the best of each
Georg Benjamin, DDS, MSc
14:00 - 15:00
Extending the limits of indications for a direct posterior restoration
Stephane Browet, DDS, MSc
15:30 - 16:30
Reinforced biomimetic solutions for posterior restoration
Javier Tapia Guadix, DDS, MSc
17:00 - 17:45
Hands-on desk 2
Creating direct veneers with injection moulding technique
Adriano Teixeira, DDS, MSc
9:30 - 10:30
Posterior wear management with injection moulding technique
Radoslav Asparuhov, DDS, MSc
11:00 - 12:00
Deep margin elevation and stress-free onlay preparation
Stephane Browet, DDS, MSc
12:30 - 13:30
Combining the modern with the practical crown workflows for high efficiency
Radoslav Asparuhov, DDS, MSc
14:00 - 15:00
Bringing indirect restorations to life with painting and luting
Javier Tapia Guadix, DDS, MSc
15:30 - 16:30
Master Lithium Disilicate: surface characterization by polishing and luting protocols
Adriano Teixeira, DDS, MSc
17:00 - 17:45
Hands-on desk 3
Just flow: using injectables for Class I restorations
Dr. Mindaugas Kudelis
9:30 - 10:30
Biocompatible solutions step-by-step for ageing patients
Prof. Matteo Basso
11:00 - 12:00
Diastema closure with free-hand technique
Assoc. Prof. Bora Korkut
12:30 - 13:30
Smooth ride to the final restoration: temporization
Prof. Marcio Vivan Cardoso
14:00 - 15:00
An introduction to the Injection Moulding Technique
Dr. Kostas Karagionnopoulos
15:30 - 16:30
Prevention and minimal intervention workflows
Dr. Jameela Haq
17:00 - 17:45
Hands-on desk 1
Smilesculpt: achieving outstanding smiles with free hand, single shade restorations
Javier Tapia Guadix, DDS, MSc
9:30 - 10:30
Unveiling the secrets to a correct emergence profile on a lateral diastema
Stephane Browet, DDS, MSc
11:00 - 12:00
Simplified layering: Aesthetic solutions for anterior restorations
Georg Benjamin, DDS, MSc
12:30 - 13:30
Bulk fill vs biomimetic restorations: getting the best of each
Georg Benjamin, DDS, MSc
14:00 - 15:00
Extending the limits of indications for a direct posterior restoration
Stephane Browet, DDS, MSc
15:30 - 16:30
Hands-on desk 2
Creating direct veneers with injection moulding technique
Adriano Teixeira, DDS, MSc
9:30 - 10:30
Posterior wear management with injection moulding technique
Radoslav Asparuhov, DDS, MSc
11:00 - 12:00
Deep margin elevation and stress-free onlay preparation
Stephane Browet, DDS, MSc
12:30 - 13:30
Combining the modern with the practical crown workflows for high efficiency
Radoslav Asparuhov, DDS, MSc
14:00 - 15:00
Bringing indirect restorations to life with painting and luting
Javier Tapia Guadix, DDS, MSc
15:30 - 16:30
Hands-on desk 3
Smooth ride to the final restoration: temporization
Prof. Marcio Vivan Cardoso
9:30 - 10:30
Emulating the natural dental morphology for anterior direct restorations: analyse and replicate concept
Assoc. Prof. Bora Korkut
11:00 - 12:00
Prevention and minimal intervention workflows
Dr. Jameela HAQ
12:30 - 13:30
Simplest ways for polychromatic Class IV restorations
Dr. Yasser Thaer
14:00 - 15:00
Smooth ride to the final restoration: temporization
Prof. Marcio Vivan Cardoso
17:00 - 17:45