Tap for Standard and Tapered Implant

Advice for use of Drill Taps

• Use with sufficient cooling by saline during tapping and at speeds of 25 rpm or less.
• Use at the end in a drill sequence.
• Use with attention to tilt.
• Increase handpiece setting torque gradually (MAX: 50 Ncm)
• If Tap has not reached the desired depth with 50 Ncm repeat forward/reverse tapping.
• After desired depth is reached, tap is removed by reverse rotation under saline irrigation.
• Tap retrieval should be done in a straight line to prevent damage to bone screw channels.

Tap for Standard and Tapered Implant - Position of laser marking

• For standard implant

* Except for 8 mm line, position of laser marking of Tapered Implant Tap is different from Twist Drill and Tapered Implant Drill in order to enable the appropriate insertion torque of implant. Therefore, except for 8 mm, the tapping depth is shallower than the implant length.